Operation Section
Lifting and Storage
i07475021
Engine Lifting
NOTICE
Always inspect lifting eyebolts and all other lifting
equipment for damage before performing any lifting.
Never bend the eyebolts and the brackets. Never
perform product lifting if components are damaged.
Only load the eyebolts and the brackets under ten-
sion. Remember that the capacity of an eyebolt is
less as the angle between the supporting members
and the object becomes less than 90 degrees.
Illustration 25
g02126835
Typical example
Use a hoist to remove heavy components. Use a
lifting beam (A) to lift the engine. All supporting
members (chains and cables) should be parallel to
each other. The chains and cables should be
perpendicular to the top of the object that is being
lifted.
28
SEBU8604-02
