Do not operate or work on this equipment unless
you have read and understand the instructions
and warnings in the Operation and Maintenance
Manuals. Failure to follow the instructions or
heed the warnings could result in serious injury
or death.
Sulfuric Acid Burn (2)
Illustration 4
g01382725
The safety messages for sulfuric acid burn are on the
side of exhaust cooler(2) and the top of exhaust
cooler (not shown).
Sulfuric Acid Burn Hazard may cause serious
personal injury or death.
The exhaust gas cooler may contain a small
amount of sulfuric acid. The use of fuel with sul-
fur levels greater than 15 ppm may increase the
amount of sulfuric acid formed. The sulfuric acid
may spill from the cooler during service of the en-
gine. The sulfuric acid will burn the eyes, skin
and clothing on contact. Always wear the appro-
priate personal protective equipment (PPE) that
is noted on a material safety data sheet (MSDS)
for sulfuric acid. Always follow the directions for
first aid that are noted on a material safety data
sheet (MSDS) for sulfuric acid.
i07833369
Additional
Messages
There
are
several
specific
messages
on
this
engine.
The
exact
location
of
the
messages
and
the
description
of
the
information
are
reviewed
in
this
section.
Become
familiar
with
all
messages.
Make
sure
that
all
the
messages
are
legible.
Clean
the
messages
or
replace
the
messages
if
the
messages
are
not
legible.
Replace
the
illustrations
if
the
illustrations
are
not
legible.
When
cleaning
the
messages,
use
a
cloth,
water,
and
soap.
Do
not
use
solvent,
gasoline,
or
other
harsh
chemicals
to
clean
the
messages.
Solvents,
gasoline,
or
harsh
chemicals
could
loosen
the
adhesive
that
secures
the
messages.
Loose
adhesive
will
allow
the
messages
to
fall.
Replace
any
message
that
is
damaged,
or
missing.
If
a
message
is
attached
to
a
part
that
is
replaced,
install
a
message
on
the
replacement
part.
Replacement
labels
may
be
obtained
from
Perkins
distributors.
M0109073
7