All lamps will illuminate for 2 seconds in order to
check that the lamps are functioning when the
keyswitch is turned to the ON position. If any of the
lamps stay illuminated, the reason for illumination
should be investigated immediately.
Instrument panels and Displays
In order to monitor the engine a wide verity of
instrument panels are available. These instrument
panels can contain the indicator lamps and the
gauges for the application.
Also available are mini power displays and
performance monitors. These displays and monitors
can show the operator the following engine
information.
• The system configuration parameters
• The customer specified parameters
• Diagnostic codes
• Event codes
• Coolant temperature
• Oil temperature
• Oil pressure
• Intake temperature
• Intake pressure
• Atmospheric pressure
• Fuel temperature
Aftertreatment Lamps and Gauges
• Emission malfunction lamp
• Action indicator lamp
• Gauge for Diesel Exhaust Fluid (DEF)
• Low warning lamp for DEF
• Wait to disconnect lamp (optional)
The wait to disconnect lamp will be illuminated during
engine operation and will be extinguished after the
engine has stopped. Do not disconnect the battery
disconnect switch during the period the lamp is
illuminated. The DEF system will be cooled and
purged during this time. Also, during the wait to
disconnect lamp is illuminated the engine electronic
control module is active storing information from the
engine and aftertreatment sensors.
Note:
The wait to disconnect lamp will not be
checked at key on. The wait to disconnect lamp will
illuminate at key on.
i07622830
Monitoring
System
(Engine
Indicators
and
Aftertreatment
Indicators)
Engine
Indicator
Lamps
Note:
When
in
operation
the
amber
warning
lamp
has
three
states,
solid,
flashing,
and
fast
flashing.
The
sequence
is
to
give
a
visual
indication
of
the
importance
of
the
warning.
Some
application
can
have
an
audible
warning
installed.
Ensure
that
the
engine
maintenance
is
carried
out
at
the
correct
intervals.
A
lack
of
maintenance
can
result
in
illumination
of
the
warning
lamp.
For
the
correct
intervals
of
maintenance,
refer
to
the
Operation
and
Maintenance
Manual,
“Maintenance
Interval
Schedule”.
SEBU9063-07
51