Perkins 1103AA-33G Operation And Maintenance Manual Download Page 48

Page: 48 / 84

i08323373

Maintenance

Interval

Schedule

When

Required

“ Battery - Replace“ . . . . . . . . . . . . . . . . . . . . . . . . . 52

“ Battery or Battery Cable - Disconnect“ . . . . . . . . . 53

“ Engine - Clean“ . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

“ Engine Air Cleaner Element - Replace“ . . . . . . . . 59

“ Engine Oil Sample - Obtain“ . . . . . . . . . . . . . . . . . 61

“ Fuel Injector - Test/Change“ . . . . . . . . . . . . . . . . . 65

“ Fuel System - Prime“ . . . . . . . . . . . . . . . . . . . . . . . 68

“ Severe Service Application - Check“ . . . . . . . . . . 75

Daily

“ Cooling System Coolant Level - Check“. . . . . . . . 57

“ Driven Equipment - Check“ . . . . . . . . . . . . . . . . . . 58

“ Engine Air Cleaner Service Indicator - Inspect“ . . 60

“ Engine Oil Level - Check“ . . . . . . . . . . . . . . . . . . . 61

“ Fuel System Primary Filter/Water Separator -
Drain“ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

“ Walk-Around Inspection“ . . . . . . . . . . . . . . . . . . . . 77

Every 50 Service Hours or Weekly

“ Fuel Tank Water and Sediment - Drain“ . . . . . . . . 73

Every 100 Service Hours

“ Fuel Control Linkage - Check/Lubricate“ . . . . . . . 64

Every 250 Service Hours

“ Engine Oil and Filter - Change“. . . . . . . . . . . . . . . 62

“ Fuel Inlet Screen - Clean/Inspect/Replace“ . . . . . 66

“ Fuel System Primary Filter (Water Separator)
Element - Replace“ . . . . . . . . . . . . . . . . . . . . . . . . . 70

Every 300 Service Hours

“ Fuel Control Linkage - Check/Lubricate“ . . . . . . . 64

Every 500 Service Hours

“ Alternator and Fan Belts - Inspect/Adjust/
Replace“ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Every 500 Service Hours or 1 Year

“ Battery Electrolyte Level - Check“ . . . . . . . . . . . . 52

“ Engine Air Cleaner Element - Replace“ . . . . . . . . 59

“ Engine Ground - Inspect/Clean“ . . . . . . . . . . . . . . 60

“ Hoses and Clamps - Inspect/Replace“. . . . . . . . . 74

“ Radiator - Clean“ . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Every 6 Months

“ Fuel Control Linkage - Check/Lubricate“ . . . . . . . 64

Every 1000 Service Hours

“ Engine Valve Lash - Inspect/Adjust“ . . . . . . . . . . . 64

Every 2000 Service Hours

“ Aftercooler Core - Inspect“ . . . . . . . . . . . . . . . . . . 50

“ Alternator - Inspect“ . . . . . . . . . . . . . . . . . . . . . . . . 51

“ Engine Mounts - Inspect“ . . . . . . . . . . . . . . . . . . . 60

“ Starting Motor - Inspect“ . . . . . . . . . . . . . . . . . . . . 76

“ Turbocharger - Inspect“ . . . . . . . . . . . . . . . . . . . . . 76

M0105633-01

Maintenance Section
Maintenance Interval Schedule

Summary of Contents for 1103AA-33G




















































































Search results

Summary of Contents for 1103AA-33G

Reviews:

Related manuals for 1103AA-33G

Brands by name

Popular brands

Perkins 1103AA-33G, Operation And Maintenance Manual

Search results

Summary of Contents for 1103AA-33G

Reviews:

Related manuals for 1103AA-33G

Brands by name

Popular brands