PerkinElmer PINAACLE 900 Series, Customer Hardware And Service Manual

Page: 143 / 390

127
Installing the Cooling System
See the following procedure Filling the Cooling System on page 127 before you
plug in and start the cooling system.
Filling the Cooling System
The cooling system is self-priming; air in the system is removed automatically as
the cooling system operates. The coolant is a 1:10 solution of glycerol in water (1
part glycerol plus 9 parts water).
Figure 4-12. Water level indicator
Note
The cooling system contains 0.5 L glycerol when it leaves the factory
(do
not use antifreeze).
Item Description
1 Water level indicator
1