background image

 

www.optoel ectronics.p erkin elmer .com 

AC U L E D ®   D e signer  Kit

  

S i l v e r                   6  

U
S
E
R
 

M
A
N
U
A
L

 

Operating the ACULED VHL / DYO Module 

 
The ACULED Designer Kit is equipped with two 4-channel power supplies that can either provide 350 mA or 700 
mA  to  the  ACULED  (fig.  4).  Details  on  the  two  power  supply  units  can  be  found  in  the  separate  power  supply 
datasheets. The ACULED modules contain different versions of ACULED VHL and ACULED DYO that have four 
separately addressable chips (see datasheets). Each channel of the power supply addresses one chip and can be 
adjusted manually with the enclosed screwdriver (fig. 5). 
 
 

 
 
 
 

 
 
 
 
 

 

 

  

 

  

  

 

North American Sales Office 
PerkinElmer Optoelectronics 

35 Congress Street 
Salem, MA 01970, USA 
Telephone: +1 978-745-3200 
Toll free: (North America) +1 800-950-3441 
Fax: +1 978-745-0894 
Email: [email protected] 

www.optoelectronics.perkinelmer.com 

European Headquarters 
PerkinElmer Optoelectronics 

Wenzel-Jaksch-Str. 31 
65199 Wiesbaden, Germany 
Telephone: (+49) 611-492-269 
Fax: (+49) 611-492-170 
Email: [email protected] 

Asia Headquarters 
PerkinElmer Optoelectronics 

47 Ayer Rajah Crescent #06-12 
Singapore 139947 
Telephone: (+65) 6775-2022 
Fax: (+65) 6775-1008 
Email: [email protected] 

 
 
For a complete listing of our global offices, visit www.optoelectronics.perkinelmer.com 
©2008 PerkinElmer, Inc. All rights reserved. The PerkinElmer logo and design are registered trademarks of PerkinElmer, Inc.  ACULED®, VHL™, DYO™, and the LED Solutions logo are 
trademarks of PerkinElmer, Inc. or its subsidiaries, in the United States and other countries.  All other trademarks not owned by PerkinElmer, Inc. or its subsidiaries that are depicted herein are the 
property of their respective owners. PerkinElmer reserves the right to change this document at any time without notice and disclaims liability for editorial, pictorial or typographical errors. 
600230_02 USM0608 

Figure 5  

350 mA heat sink with mounted ACULED module and driver 
Left: module without operation 
Middle: operated module 
Right: adjustment of channel 1 

Figure 4  

Left: 350 mA power supply 
Right: 700 mA power supply 

Summary of Contents for LED Solutions ACULED Designer Kit Silver







Reviews: