Universal ATR Sampling Accessory User’s Guide . 9
3.
Pivot the UATR on the ledge at the front of the sample area (Figure 4a), then tip it
backwards (Figure 4b).
NOTE:
If the accessory is pivoted too far forward on the sample area ledge it will not move
correctly into position.
(a)
(b)
Figure 4 Installing the accessory
4.
Push the UATR home firmly, ensuring that the top of the accessory mates properly with
the lid of the instrument (Figure 5).
The UATR is now ready for use.
Figure 5 UATR installed in a Spectrum Two
