09931294C
12
2.
Using the M3 wrench, remove the screw in the single cell holder and disassemble the holder.
Figure 18 Removing the screw in the single cell holder
3.
Insert the stirrer head of the stirrer control cable into the single cell holder.
Figure 19 Inserting the stirrer head
4.
Assemble the single cell holder with the stirrer head inserted, and tighten the screw using the M3
wrench.
Figure 20 Assembling the single cell holder
5.
If it is required to connect the stirrer head to the reference holder, install the stirrer head at the
reference holder following the procedures of #2 to #4.
