background image

1

1. Introduction

Thank you for choosing the iSimple IS77 as your audio input solution. The IS77 is designed to 

provide the connecting link between your audio source and your FM radio. Using the supplied 

accessories, you can connect virtually any audio source into any FM equipped radio. This 

interface has a universal input that can be configured to accept an audio signal from any source 

with an RCA connection or a standard 3.5mm “Headphone” output. 
The IS77 will route the audio from your device through your factory or aftermarket radio not 

equipped with a built in auxiliary input. If your audio source is an iPod featuring a docking 

connector, this interface will also charge the iPod’s battery, when connected.

2. IS77 Components

• One Radio Input Interface

• One 3.5 mm to 3.5 mm Audio Cable (4ft.)

• One 3.5mm to RCA adapter

• One Power Cable with a On/Off Switch

• One iPod Audio/Video Cable Outputs (5ft.)

• One “factory look” 3.5mm Dash/Panel Mount Audio Input Cable (6ft.)

3. Installation Options 

(Choose A or B)

A. Connecting an iPod

 

iPod Specific installation instructions

1) Connect the two audio connectors from the iPod cable to the audio inputs on the PURI.

2)  Connect  the  two-pin  power  connector  on  the  iPod  cable  to  the  connector  labeled  

“Connect to iPod” in the PURI wiring harness.

3) The Yellow connector from the iPod cable is intended for video playback from iPods that 

support this function.  Route this Video connection to any video display that is not in view 

of the driver while operating the automobile.

4) Route the iPod connector to your chosen iPod location in your automobile.  Common 

locations are the glove box, center console or in a mounted iPod cradle.  You will need to 

access the iPod in order to change music selections, etc.. 

Antenna Out*

Antenna In *

PURI

Connects to iPod

Connects to

On/Off Switch

MENU

3. Connecting a source with RCA outputs

iPod Audio Cable

(5 ft.)

Fuse

Fuse

3.5 mm to RCA

Adapter

Antenna Out*

Antenna In *

PURI

Connects to

On/Off Switch

Fuse

3.5 mm to 3.5 mm

Audio Cable (4 ft.)

“factory   look”  

3.5 mm 

Dash/Panel Mount

Audio Input  Cable (6 ft.)

3/8” hole

RCA to RCA

(not  included)

Antenna Out*

Antenna In *

PURI

Connects to

On/Off Switch

Fuse

audio source

(not included)

MP3

(not included)

iPod

(not included)

* Some radios require the addition of antenna connection adapters

Connect To

SWITCH

Connect To

iPod

Connect  To

SWITCH

iPod Conection

Not USE

Connect  To

SWITCH

iPod Conection

Not USE

audio source

(not included)

OR

Summary of Contents for IS77









Reviews: