GM Appendix 1
Corvette
Aux2car Adaptor Connection to
Chevrolet Corvette
Most Corvettes are pre-wired to the trunk. In case you can’t fi nd the connector in the
trunk, please do the following:
1. Preparing the GM-A Cable
Take the PXHGM1 cable and cut off the Black and Red plug. You will then have two cables
in your hands. One cable with the big white 22 pin connector and 1 with a small white 9 pin
connector. You will use only the cable with the big White 22 pin connector (connects to the
Aux2Car).
2. Connection to the Vehicle
There are two connectors located behind the radio, one is black and the other is grey. We
will fi rst work with the grey connector.
Grey Connector:
Blue
to Connector
Brown+White
(Pin 11, the 1st pin)
Red
to Connector
Green+White
(Pin 12, the 2nd pin)
Black
to Connector
Black+White
(Pin 13, the 3rd pin)
Yellow
to Connector
Dark Green
(Pin 15, pin 14 is empty)*
Black Connector:
Orange to Black Connector thick
Orange
(Pin 10, the last pin, +12v)
Brown to Black Connector
Black+White
(Pin 5, the middle, Ground)
3. Technical Support
If you have any questions or need any support, please feel free to call 800-477-2267 from
9:30am-6pm EST.
NOTE: CORVETTE 2005 IS NOT COMPATIBLE
19
