SR-15
QUICK START
Welcome to the Peribit SR-15 Sequence Reducer. This 1 rack-unit network infrastructure
device is deployed on the LAN side of the edge router. Using this quick start card, the SR-15
can be installed and operational in a matter of minutes.
Peribit Networks, Inc.
2300 Central Expressway
Santa Clara, CA
95050
1.866.PERIBIT
1.408.330.5600
www.peribit.com
Before you begin:
•
Inspect the package contents. Refer to the package contents document
enclosed with the product.
•
Ensure sufficient power is available. Supply circuits should be protected
by a maximum 20A circuit breaker.
•
Ensure a minimum of 6 inches clearance in the front and back of the
chassis.
•
If your network architecture restricts specific ports along the communi-
cation path between Peribit Sequence Reducers, ensure ports 3577 and
3578 are open for TCP and UDP data transmission.
•
Identify a 10/100 Ethernet LAN port for the SR-15 that transmits data to
your WAN router. This port is typically from an aggregation switch, or
from another LAN device connected directly to the router.
•
Obtain a license key for the Sequence Reducer. The license key deter-
mines the throughput levels for the device, and properly registers the
product with Peribit Networks. To obtain a permanent license key, go to
http://license.peribit.com.
