12. Once you have everything plumb and level, you can water in the concrete. You may want to
chop the water in with a stick or a shovel to get rid of any air bubbles. Make sure while you do
this the posts are held plumb.
13. Allow the concrete to fully dry, overnight will probably be enough time.
14. Install the rafters over the beam, secure using 3” screws provided with the kit into the predrilled
holes in the beam.
Note: If installing a pressure treated pine kit, do not paint or stain until the wood is dry.
You’re Done!
Thanks again for your business. We really do appreciate our customers and their feedback on
ways to improve our products. So, after you’ve completed putting your kit together, sit down,
have a cold drink, and drop us a line via email to tell us what you think about our products.
Any feedback on how we can make our kits easier to install will be very helpful. Pictures are
always welcome!
Built with pride in the U.S.A!
Pergola Depot
Call: 1-877-563-0002
Email: [email protected]
www.pergoladepot.com
