Installation Steps
Step 1
- If not already done, remove the wrapping from the outside of the crate.
Step 2
- Lay all parts next to where you will be installing the pergola.
Step 3
- Place all four beams on the ground (with the
x’s
facing up) exactly where you would
like the pergola to stand, like so:
Step 4
- Slide two rafters down onto the two outermost X marks on the beams and get a screw
started through the top of the rafter in the predrilled holes. Screw them in just enough to hold
the rafter in place. You may have to move the back beam around a little to get it into place.
Make sure you have the rafter on top of the same mark on both beams. The X marks look like
this: lXl
