- 2-
F
rame Alignment
1.
Make sure the rear wheel is vertical to ground and two wheels are parallel to each
other.
2.
As show in picture 5, the rear wheel leans on right, loose the right two bolts and tighten
left two bolts on the frame. Leaning to left side, loose left two bolts and tighten right two
bolts on the frame. Once alignment is done, please tighten four bolts on the main
frame.
3.
After the above alignment, attach the tie rod to the underside of hub mount (pic 6)
4.
Measure the distance from the center of the t
ire’s leading edge to the other (pic 7)
5.
Measure the distance from the center of the trailing edge to the other (pic 8)
6.
Rotate the tie rod until the result of step 4 and step 5 is equal
7.
Tighten two tie rod locking nuts (pic 8)
Pic 5
Pic 7
Pic 6
Pic 8
Pic 9
Summary of Contents for JC 70 Speed Trike
Page 2: ......
