Page 8
WARNING:
If any part is broken
or missing, DO NOT attempt to plug in the
power cord or operate the tool until the
broken or missing part is replaced. Failure
to do so could result in possible serious
injury.
WARNING:
Do not attempt to
modify this tool or create accessories not
recommended for use with this tool. Any
such alteration or modification is misuse
and could result in a hazardous condition
leading to possible serious injury.
WARNING:
Your tool should
never be connected to the power source
when you are assembling parts, making
adjustments, installing or removing
blades, cleaning, or when it is not in
use. Disconnecting the tool will prevent
accidental starting, which could cause
serious personal injury.
CONTENTS
Planer, edge guide, blade-change wrench
(installed on the planer), rabbeting depth
stop, dust bag and instruction manual.
UNPACKING
1. Carefully remove the tool and any
accessories from the carton. Make sure
that all items listed in the packing list are
included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
ASSEMBLY
REPLACING THE PLANER
BLADES
CAUTION:
Always ensure that
the tool is switched OFF and unplugged
from the power supply before installing or
removing blades.
REMOVING A PLANER BLADE
(FIG. 1-2)
1.
Disconnect the plug from the power
source.
2. Place the planer upside down on a flat
surface.
3. Loosen the three clamping screws with
the wrench that is provided (FIG. 1).
4. Carefully push the blade sideways out
of the blade drum. A piece of wood may
be used for this purpose (FIG. 2).
FIG. 1
FIG. 2
NOTICE: The planer blades may not be re-
sharpened. Do not attempt to sharpen or
use re-sharpened blades of any kind.