Performax 241-0924 Operator'S Manual Download Page 7

7

5) BATTERY TOOL USE AND CARE

 

 

Recharge only with the charger specified by the manufacturer. 

A charger that 

is suitable for one type of battery pack may create a risk of fire when used with 
another battery pack.

 

 

Use power tools only with specifically designated battery packs. 

Use of any 

other battery packs may create a risk of injury and fire.

 

 

When battery pack is not in use, keep it away from other metal objects, 
like paper clips, coins, keys, nails, screws or other small metal objects that 
can make a connection from one terminal to another. 

Shorting the battery 

terminals together may cause burns or a fire. 

 

 

Under abusive conditions, liquid may be ejected from the battery; avoid 
contact. If contact accidentally occurs, flush with water. If liquid contacts 
eyes, additionally seek medical help.

 Liquid ejected from the battery may 

cause irritation or burns.

6) 

SERVICE

 

 

Have your power tool serviced by a qualified repair person using only 
identical replacement parts. 

This will ensure that the safety of the power tool 

is maintained.

SPECIFIC SAFETY RULES FOR CORDLESS JIG SAW 

 

 

Use battery only with charger listed.

Battery pack

Charger

252-0908

252-0912

252-0900

 

 

Hold the power tool by insulated gripping surfaces when performing an 
operation where the cutting tool may contact hidden wiring or its own cord. 

Contact with a “live” wire will make exposed metal parts of the tool “live” and 
shock the operator.

 

 

Use clamps or another practical way to secure and support the workpiece 
to a stable platform. 

Holding the work by hand or against your body leaves it 

unstable and may lead to loss of control.

 

 

When using the jigsaw, use safety equipment, including safety goggles or shield, 
ear defenders, dust mask and protective clothing including safety gloves.

 

 

Ensure that the lighting is adequate.

 

 

Do not use the saw unless the guards are in place.

 

 

Keep the shoe plate on the workpiece.

 

 

Do not put pressure on the saw, such that it slows the motor down. Allow the 
saw blade to cut without pressure. You will get better results and you will be 
taking better care of your tool.

Summary of Contents for 241-0924

















Reviews: