11
ASSEMBLY
INSTALLING THE DUST BAG
(see Fig. 2)
Make sure the dust-collector bag is upright (reference the performax logo on
the bag), and slide the collar of the dust-collector bag over the dust-extraction
port until it is attached securely.
Installing the adaptor for a shop vacuum
Remove the dust-extraction port by removing the two screws that hold it in
place. Attach the shop vacuum
adaptor using the same two screws.
Releasing and locking the saw head
1. Press the saw head down and hold
it lightly. Pull out the stop latch
in order to release the saw head.
The saw head should move up and
down freely (see Fig. 3).
2. Place the saw head at the lowest
position. Insert the stop latch in
order to lock the saw head for
transporting and storage.
REMOVING THE BLADE
(see Fig.
4)
WARNING:
To reduce the risk of
injury, always unplug the tool before
removing or installing a blade.
1. Unplug the tool.
2. Raise the saw head.
3. Remove the upper screw on the
blade-screw guard (Fig. 1, #5) by
turning it counter-clockwise using
a screwdriver(not included).
4. Lift and hold up the lower blade
guard, and rotate the blade-screw
guard in order to expose the
threaded blade screw.
5. Press and hold the spindle-lock
button (Fig. 1, #18), and rotate the
Fig. 3
Fig. 2
Dust bag
stop latch
Dust-extrac-
tion port
Fig. 4
Outer flange
Threaded blade screw
Blade
Inner flange
