background image

Warranty  

 

PERFORMAX™ OSCILLATING SPINDLE SANDER WARRANTY 

 

 
30-DAY MONEY BACK GUARANTEE:

 

This 

PERFORMAX™

 brand power tool carries our 30-Day Money Back Guarantee.

  

If you are not 

completely satisfied with your 

PERFORMAX™

 brand power tool for any reason within thirty (30) 

days from the date of purchase, return the tool with your original receipt to any 

MENARDS

®

 retail 

store, and we will provide you a refund – no questions asked. 
 

2-YEAR

 

LIMITED WARRANTY:  

 

This 

PERFORMAX™

 brand power tool carries a 2-Year Limited Warranty to the original purchaser.  

If, during normal use, this 

PERFORMAX™

 power tool breaks or fails due to a defect in material or 

workmanship within two (2) years from the date of original purchase, simply bring this tool with 
the original sales receipt back to your nearest 

MENARDS

®

 retail store.  At its discretion, 

PERFORMAX™

 agrees to have the tool or any defective part(s) repaired or replaced with the same 

or similar 

PERFORMAX™

 product or part free of charge, within the stated warranty period, when 

returned by the original purchaser with original sales receipt.   Not withstanding the foregoing, this 
limited warranty does not cover any damage that has resulted from abuse or misuse of the 
Merchandise.  This warranty: (1) excludes expendable parts including but not limited to blades, 
brushes, belts, bits, light bulbs, and/or batteries; (2) shall be void if this tool is used for commercial 
and/or rental purposes; and (3) does not cover any losses, injuries to persons/property or costs.  
This warranty does give you specific legal rights and you may have other rights, which vary from 
state to state.  Be careful, tools are dangerous if improperly used or maintained.  Seller’s employees 
are not qualified to advise you on the use of this Merchandise.  Any oral representation(s) made 
will not be binding on seller or its employees.  The rights under this limited warranty are to the 
original purchaser of the Merchandise and may not be transferred to any subsequent owner.  This 
limited warranty is in lieu of all warranties, expressed or implied including warranties or 
merchantability and fitness for a particular purpose.  Seller shall not be liable for any special, 
incidental, or consequential damages.  The sole exclusive remedy against the seller will be for the 
replacement of any defects as provided herein, as long as the seller is willing or able to replace this 
product or is willing to refund the purchase price as provided above.  For insurance purposes, seller 
is not allowed to demonstrate any of these power tools for you. 
 
For questions / comments, technical assistance or repair parts –  
Please Call Toll Free at:  1-888-315-3080 

(M-F 8am – 5pm CST)

 

 

SAVE YOUR RECEIPTS.  THIS WARRANTY IS VOID WITHOUT THEM.   

 

 
 
 
 

Summary of Contents for 240-2978





















Reviews: