Performance ViewPoint, Owner'S Manual

Page: 1 / 4

Thank you for purchasing a
ViewPoint
™ Dual light system.
All ViewPoint ™ light systems are
constructed of the highest
quality materials, such as cold-
forged aluminum housings,
heavy duty cords with strong
positive-click connections, and halogen
bulbs with dichoric glass reflectors. Your
ViewPoint
™ Dual light system produces a clean light
pattern for optimum visibility and is easily recharged
for continued night riding enjoyment.
Please save these instructions, as they contain impor-
tant information for taking care of your ViewPoint
™
Dual Pro light.
Installation and Use
Note: Be sure to fully charge battery before first use (see the following section
for details).
1. Slide the battery into your waterbottle cage.
2. Install the headlight assembly onto your handlebar so that the headlight is
positioned over the stem (see Figure 1).
3. Open the Quick Release Clamp, close the clamp around your bar, rotate the
Quick Release Lever into position on the upper part of the clamp (with the
lever pointing up) and then flip the Quick Release Lever downward to lock
the clamp into position (see Figure 1).
4. If the clamp diameter setting is too loose or too tight, simply screw or
unscrew the lever bolt as necessary to assure a secure grip on the bar.
1. Disconnect headlamp from battery pack.
2. To remove the bulb, carefully unthread the lens cap. Do not allow the bulb
to rotate. It may be necessary to press down gently on the bulb while
unthreading the cap.
3. Unplug the used bulb and discard it.
4. To install the bulb, first insert the two prongs of the retainer clip into the
larger holes on the ceramic socket. Next, insert the bulb lead wires into the
smaller holes in the socket.
5. Rethread lens cap onto housing. Make sure the lens cap thread is fully
engaged with the housing. Do not plug the lamp into the battery until
after this step is complete.
Performance, Inc.
One Performance Way
Chapel Hill, NC 27514
www.performancebike.com
1-800-727-2453
®
Bulb Replacement – Read Carefully!
Take care when replacing the lamp in order not to damage the bulb connection.
Owner’s Manual
Dual Pro
For technical support, call 1-800-727-2453 from 9am - 6pm Monday through Friday.
Base
Bulb
Lens Cap
Assembly
Ceramic Socket
Bulb Retainer Clip
Exploded View
Allen Head Bolt
ONLY ONE LAMP SHOWN
FOR CLARITY