background image

Performance, Inc.

One Performance Way
Chapel Hill, N.C. 27514
1-800-727-2453
Made in Italy
www.performancebike.com

PERFORMANCE and the Flying P Logo are registered marks of Performance, Inc.

40-1669    0703_1

Performance Tech Support 1(800)727-2453

9am-6pm EST Monday-Friday 

• Read and follow all instructions.
• Before beginning each workout, be sure bicycle is securely attached to the trainer.
• Do not touch resistance unit during use and for some period after use because it is very hot and can cause burns.
• Keep children and pets away from the trainer during use.
• Before you start any exercise program you should consult a physician.

!  

SAFETY PRECAUTIONS

Congratulations on your purchase of the Travel Trac

Mag Force bicycle training system. Your new trainer

provides the same data on speed, distance and time that is available from a full-featured cycling computer,
plus information on power output (expressed in watts), elevation gain and slope (percent grade). Your
indoor training has never been as fun or effective as it will be with your new Travel Trac

Mag Force!

NOTE:  

This trainer is intended for single-rider bicycles only.

adjustable
magnetic
trainer with
computerized
display

Summary of Contents for Travel Trac Mag Force

Page 1: ...can cause burns Keep children and pets away from the trainer during use Before you start any exercise program you should consult a physician SAFETY PRECAUTIONS Congratulations on your purchase of the Travel Trac Mag Force bicycle training system Your new trainer provides the same data on speed distance and time that is available from a full featured cycling computer plus information on power outpu...

Page 2: ...rainer Failure to securely attach the bicycle to the trainer could result in the bicycle falling causing injury to the rider or bystanders WARNING 2A 2B 2C F B C A G H I J E O 1 D Table of Contents I About Your Travel Trac Mag Force System 2 II Parts List 3 III Assembly 3 IV Bicycle Installation 3 V Set Up 4 VI Using Your Travel Trac Mag Force Trainer 4 A Screens 5 B Battery Life Indicator 6 C Res...

Page 3: ...sing Your Travel Trac Mag Force Trainer Once the bicycle is mounted to the trainer see section IV and the initial set up is complete see section V you are ready to ride Press either button SET or MODE or begin pedaling to activate the computer Current Speed and other data should immediately appear in the display screen Adjust the resistance level simulated slope using the shift lever Rotating the ...

Page 4: ...ious ride 1 To clear the data press and hold the SET button After 3 seconds CLEAR will be displayed at this point no data has been deleted Continue to hold the SET button and in another 3 seconds DONE will appear indicating that all accu mulated data except Total Distance and Total Ride Time has been cleared from memory See Figure 14 2 To reset Total Distance and Total Ride Time as well as all oth...

Reviews: