SPECIFICATIONS
TABLE OF CONTENTS
Amps: 0.5
Volts:
120VAC ~ 60HZ
Free Speed:
3,500 RPM
WARNING: When using tools basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Introduction ................................................................. 2
Safety Alert .................................................................. 2
Unpacking & Inspection ............................................. 2
Safety Warnings .......................................................... 3
Specifications ............................................................. 2
Tool Use & Care .......................................................... 4
Random Orbital Buffer Features ............................... 5
Operation .................................................................... 5
Care & Maintenance ................................................... 7
Troubleshooting Guide ............................................... 7
Warranty Information ................................................. 8
INTRODUCTION
The Performance Tool 6” Random Orbital Buffer is designed for polishing, waxing, and buffing. Powered by a durable 0.5 Amp motor, the random
orbiting mechanism delivers 3,500 rotations per minute (RPM), mimicking the motion of circular hand polishing. Oval Palm Grip for Bettter Control.
Designed for years of trouble-free use, it will tackle your automotive finish maintenance applications with ease.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described
within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the
time of publication. The manufacturer reserves the right to make product changes at any time without notice.
SAFETY ALERT
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or maintain this
random orbital buffer. Failure to comply with the instructions may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using this random orbital buffer:
DANGER
Indicates an imminently hazardous situation that, if not avoided, WILL result in death or serious injury.
WARNING
Indicates a potentially hazardous situation that, if not avoided, COULD result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that, if not avoided, MAY result in minor or moderate injury.
NOTICE
Indicates important information, which if not followed, MAY cause damage to equipment.
UNPACKING & INSPECTION
After opening the carton, unpack your new random orbital buffer and related parts & accessories. Please inspect it carefully for any damage that may have
occurred during transit. Please check it against the photograph on carton. If any parts are missing, please call customer service at 1-800-426-1262.
WARNING
Do not operate this random orbital buffer if damaged during shipment, handling or misuse. Do not operate the tool until the parts have
been replaced or the fault rectified. Failure to do so may result in serious personal injury or property damage.
All damaged parts must be repaired or replaced as needed prior to operating this tool.
Check to see that all nuts, bolts and fittings are secure before putting this tool into service. If you have any questions, or require assistance
with damaged or missing parts, please contact our customer service department at: 1-800-426-1262
2
Cord:
17" 2-Pronged Polarized
Pad Size:
6" (15.24cm)