5
GENERAL OPERATION
WARNING
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at
the beginning of this manual including all text under subheadings therein before
set up or use of this product.
• Ensure the canister and filter are properly installed.
• Remove cigarette lighter or outlet cover from your vehicles 12V outlet and insert the plug
from the vacuum. NOTE: Ensure plug is properly inserted into the outlet. The red light
should go on indicating sufficient power is present.
• Push the power switch forward to turn on the vacuum.
• Always empty and clean the canister and filter as needed before and after each use.
This will help maintain maximum suction. To release canister press both Canister
release buttons and pull away from vacuum.
• Work only in daylight or good artificial light.
• Avoid sucking in water or other liquids. Do not use with any combustible materials.
• When moving the vacuum from one work area to another, turn it off and unplug it
between uses.
• Do not use the tool, if the canister, filter or nozzle is damaged or not attached. Do not
use any damaged attachments.
• Make sure the vents are free from dirt, debris or other blockages.
• Unplug the vacuum during any of the following:
- Every time you walk away from the device
- Before inspecting, cleaning or repairing the device
- After the device has been struck by a foreign object - check if it is broken
- If it begins to vibrate excessively
- If it overheats, smokes, or makes unusual noises
PREPARATION
USING ATTACHMENTS
• To use the attachments (i.e. the crevice tool and brush tool), turn the vacuum off and
insert the desired attachment into the nozzle of the vacuum.
• The flexible and extension can be used in combination with the other attachments.
