2
SAFETY GUIDELINES / DEFINITIONS
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or
maintain this product. Failure to comply with the instructions may result in serious personal injury and/or property
damage!
The following signal words are used to emphasize safety warnings that must be followed when using this
product:
PRIOR TO USING THIS PRODUCT, READ AND UNDERSTAND ALL INSTRUCTIONS AND SAFETY PRECAUTIONS.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and
troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are
based upon the latest product information available at the time of publication. The manufacturer reserves the right to make
product changes at any time without notice.
DANGER Indicates an imminently hazardous
situation that, if not avoided, WILL result in death or
serious injury.
WARNING Indicates a potentially hazardous
situation that, if not avoided, COULD result in death
or serious injury.
CAUTION Indicates a potentially hazardous situation
that, if not avoided, MAY result in minor or moderate
injury.
NOTICE Indicates important information, which if not
followed, MAY cause damage to equipment.
WARNING DO NOT operate this product if damaged during shipment, handling or misuse. Before each use,
inspect the general condition of the tool. Check for cracks, breaks, or bends in the equipment, and any other
condition that may affect its safe operation. If a problem occurs with the equipment, immediately discontinue its
use and have the problem corrected before further use. Do not use damaged equipment.
Please have the serial number, model number, and date of purchase available for reference when calling.
INSTALLATION PRECAUTIONS
WARNING
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS
PRODUCT. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND
WILL VOID WARRANTY.
1. Install all sensitive electrical components (including wiring connections and battery) inside
a weatherproof enclosure to prevent electric shock.
2. Do not wire multiple panels in series.
3. This solar panel kit is not designed for tie-in to an electrical grid.
4. Use with 12 VDC batteries only.
BATTERY/SERVICE PRECAUTIONS
1. Before service, maintenance, or cleaning
dry solar panels and outdoor wiring thoroughly
while wearing splash-resistant ANSI-approved
safety goggles and electrically insulated gloves
2. Charge, store, and maintain batteries
according to the supplier’s instructions.
3. Do not stand on or otherwise apply
pressure to panel.
4. Do not allow children to play with or near
this item or electrical components.
5. Inspect at least monthly; do not use if
damaged, parts are loose, water is found
inside the housing, electrical insulation is
cracked or damaged, or connections are loose.
6. Maintain product labels and nameplates.
These carry important safety information. If
unreadable or missing, contact Performance
Tools for a replacement.
WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate (DEHP),
chemicals known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
SPECIFICATIONS
Rated Output 12/24 VAC / 1.5 W
Panel Size 13-3/4 IN. L x 4-3/4 IN. W
