background image

3 Ton

Service Jack

OWNER’S MANUAL

Stock Number W1617

FOR YOUR SAFETY,

please read these instructions carefully and retain them for future use.

LIMITED WARRANTY

PERFORMANCE TOOL extends only the following warranties, and only to original retail purchasers. These warranties give

specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all

exclusions and limitations of warranties and remedies. There may be other rights which vary from state to state. 

PERFORMANCE TOOL warrants the product to be free from defects in materials and workmanship under normal use and

service. A defective product may be returned for a free replacement within 90 days from the date of purchase, provided that

product is returned to place of purchase immediately after discovery of defect. After 90 days and up to 1 year from date of

purchase, PERFORMANCE TOOL will replace at no charge any parts which our examination shall disclose to be defective and

under warranty. These warranties shall be valid only when a sales receipt showing the date of purchase accompanies the

defective product or defective part(s) being returned. For part(s) after 90 days, please remit your request, postage prepaid to:

PERFORMANCE TOOL,  P.O. Box 24086 Seattle, WA 98124

These warranties exclude blades, bits, punches, dies, bulbs, fuses, and other consumables which must be replaced under normal

use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed,

or which has been repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties

apply to any product or part which has been subject to misuse, neglect, accident or wear and tear incident to normal use and

service.

PERFORMANCE TOOL does not authorize any other person to make any warranty or to assume any liability in connection with

its products.

Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL makes no express or

implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL makes no implied warranty of

merchantability and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for

personal, family or household use and not for commercial or business use, PERFORMANCE TOOL makes an implied warranty of

merchantability (and, if otherwise applicable, an implied warranty of fitness for a particular purpose), but only for the particular

qualities or characteristics, and for the duration, expressly warranted above. The laws on limitation of implied warranties may

differ from state to state, so the above limitations may not apply in all cases.

PERFORMANCE TOOL shall not be liable for consequential, incidental or special damages resulting from or in any manner

related to any product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective

product or part shall be the repair, or replacement thereof as provided above. The laws on limitation of remedies or on

consequential, incidental or special damages may vary from state to state, so the above limitations may not apply in all cases.  

Copyright © 1999 PERFORMANCE TOOL – All rights reserved

Summary of Contents for W1617

Page 1: ...s been repaired or altered in any way so as to affect adversely its performance or reliability nor shall these warranties apply to any product or part which has been subject to misuse neglect accident or wear and tear incident to normal use and service PERFORMANCE TOOL does not authorize any other person to make any warranty or to assume any liability in connection with its products Except for war...

Page 2: ... distribution of hydraulic fluid See Figure 1 To raise Turn release valve clockwise to close Make certain that load is on center of saddle Pump the jack handle to raise load to desired height Transfer load to jack stands or other appropriate supports before working under load See figure 2 To lower Raise load slightly to remove jack stands Slowly turn release valve counter clockwise just enough to ...

Page 3: ...t 2 15 Lock Washer 2 16 Hex Nut 2 17 Shaft 1 18 Snap Ring 2 19 Snap Ring 2 20 Saddle 1 21 Grease Fitting 1 22 Handle Socket 1 23 Gear Shaft 1 24 Gear 1 25 Washer 1 26 Hex Nut 1 27 Washer 1 28 Cotter Pin 1 29 Lock Washer 2 30 Bolt 2 31 Torsion Spring 1 32 Pin 1 33 Lower Handle 1 34 Upper Handle 1 35 Hex Head Screw 1 36 Handle Bolt 1 Description Qty Description Qty Description Qty Parts List REPLACE...

Page 4: ...aking adjustments Problems listed above with more than one solution may have a combination of causes Please be sure that all solutions listed for each problem have been checked to eliminate possibility of further trouble Sometimes solutions may need to be repeated for best results Read these safety warnings before operation WARNING Failure to heed these warnings may result in loss of load damage t...

Reviews: