Performance Tool W1614, Owner'S Manual

Page: 2 / 4

OPERATION
Before using your jack:
1. Turn release valve counter-clockwise to open. Pump jack handle
about 6 full strokes to assure complete distribution of hydraulic
fluid. (See Figure 1)
To raise:
Place pump handle over release valve
and turn clockwise to close. Make
certain that load is on center of saddle.
Insert handle into handle sleeve and pump to raise load to desired
height. Transfer the load to the appropriate jack stands in relation
to the vehicle tonnage. (See figure 2)
To lower:
Raise load enough to remove
jack stands. Slowly turn
release valve counter-
clockwise just enough to
allow controlled descent.
(Never turn counter-
clockwise more than 3 full turns)
1. When jack is not in use, lifting arm and handle sleeve should be in
fully down position to keep their machined surfaces free from
corrosion.
2. Keep jack clean and well lubricated at points illustrated in figure 3.
3. For best results, use only hydraulic fluid with a rating of SAE 10 for
refills. Check fluid level with jack in fully down position. Fluid level
should be up to bottom of oil fill plug. (See figure 5)
4. Regularly check for loose, worn or damaged parts and repair or
replace as necessary.
5. Replace worn or damaged parts
w i t h P e r f o r m a n c e To o l
replacement parts. Be sure that
only qualified personnel perform
repairs.
CARE & MAINTENANCE
Figure 3
Figure 2
Figure 1
RAM PARTS LIST
1 Hydraulic Unit Body 1
2 3/16” Steel Ball 2
3 Filter Body Screen 1
4 Copper Washer 1
5 Pump Cylinder O-Ring 1
7 Ram Collar 1
8 Ram 1
9 Cylinder 1
10 Fiber Washer (B) 1
11 Oil Chamber 1
12 Oil Fill Plug 1
13 Fiber Washer (A) 1
14 Top Nut 1
15 Top Nut O-Ring 1
16 1/4” Steel Ball 1
17 Pump Cylinder 1
19 Pump Cylinder O-Ring 1
20 Back Up Ring 1
21 Pump Piston 1
22 Piston Clamp 1
24 Handle Sleeve 1
26 Piston Pin 1
27 Connecting Pin 1
28 Retaining Pin 2
30 5/16” Steel Ball 1
31 Release Valve Spacer 1
32 Release Valve O-Ring 1
33 Release Valve 1
34 Spring Guide 1
35 Overload Valve Spring 1
36 O-Ring 1
37 Adjusting Screw 1
38 Cap 1
# Description Qty. # Description Qty. # Description Qty.
Ram Assembly Parts List
Figure 6