4
1. Before each use, inspect the general condi-
tion of the jack. Check for broken, cracked,
or bent parts, loose or missing parts, and
any condition that may affect the proper
operation of the product. Any jack that ap-
pears damaged in anyway must be removed
from service. Have the problem corrected
before further use. DO NOT use damaged
equipment.
2. Replace worn or damaged parts with Perfor-
mance Tool replacement parts. Be sure that
only qualified personnel perform repairs.
3. Before each use, thoroughly test the jack for
proper operation prior to its actual use.
4. When jack is not in use, jack should be in
fully down position to keep their machined
surfaces free from corrosion.
5. Keep jack clean and well lubricated at points
illustrated in figure 4.
6. For best results, use only high quality light-
weight oil.
7. Keeping the Screw Rod (4) well oiled and
free of rust will avoid the jack binding during
use.
1
2
3
Figure 4
CARE & MAINTENANCE
Monthly maintenance is recommended. Lubrication is critical to jacks as they support
heavy loads. Any restriction due to dirt, rust, etc. can cause either slow movement or
cause extremely rapid jerks, damaging the internal components. The following steps are
designed to keep the jack maintained and operational.
REPLACEMENT PARTS LIST
1
2
3
4
5
1 Base
1
2 Saddle
1
3 Screw Socket
1
4 "L" Handle
1
5 Hook Handle
1
# Description
Qty
