SPECIFICATIONS & FUNCTIONS
Specifications are subject to change without notice
WARNINGS
GENERAL MAINTENANCE & CARE
• O-LD: Maximum capacity exceeded. Remove the extra weight to avoid damaging the
load cell.
• LO: Low Power warning. Replace the batteries.
Capacity: ....................................................................... 660 Lbs / 300 Kg
Accuracy: ........................................................................ 0.2 Lbs / 0.1 Kg
Units: .................................................................................... Lbs / Kg / St
Key functions: ......................................................ON/OFF, MODE, TARE
Display:........................................................ LCD display with backlight
Auto power off: .................................................60 seconds of inactivity
Power:..................................................2 x CR2032 button cell batteries
Operation Temp: .....................................................................10 to 30º C
Low battery indicator
Changing the Unit of Measure
This scale can read in Lbs, Kgs or Oz. To change the unit, press the MODE button until the
desired unit is indicated on the right side of the display.
Data Lock Function
Once the load stabilizes an “O” will appear in the upper left of the display. Press TARE to
Zero out the weight again. Press On/Off to cancel.
Calibration
Calibration and adjustment are performed at the factory. There is no need to calibrate.
1. Avoid exposure to extreme heat or cold. Also avoid any kind of moisture. Always allow
your scale to acclimate to normal room temperature before use.
2. Keep your scale in a clean and dry environment. Dust, dirt, moisture, vibration, air
currents and proximity to other electronic equipment may have an adverse effect on the
accuracy and reliability of the scale.
3. Handle the scale with care. Gently attach and lift all items to be weighed. Although this
scale is designed to be quite durable, avoid rough treatment, as this may permanently
damage the internal parts. Always avoid shaking and dropping. This is a precision instru-
ment and should be handled with extreme care.
OPERATION
1. Press ON/OFF button to turn the scale on.
2. Wait for the display to display zero.
3. Hang the item to be weighed from the
weighing hook.
4. Observe the weight on the display.
5. To re-zero the scale, press the TARE
button.
6. To turn the scale off, hold the ON/OFF
button.
Check out the collection of hand tools we offer.
