2
SPECIFICATIONS
Specifications are
subject to change
without notice.
Square Drive: ........................................... 1/2 in.
Max. Torque (FT/LBS): .................................230
Working Torque (FT/LBS): ..................... 50-200
Air Pressure (PSI): ..........................................90
Avg. Air Consumption (CFM): .........................7
Free Speed (RPM) .......................................7800
Air Inlet (NPT): ......................................... 1/4 in.
Hose Size (ID): ......................................... 3/8 in.
Specifications are subject to change without notice.
SAFETY GUIDELINES / DEFINITIONS
UNPACKING AND INSPECTION
WARNING: Read and understand this entire instruction manual before attempting to assemble,
install, operate or
maintain this product. Failure to comply with the instructions may result in serious
personal injury and/or property damage! The following signal words are used to emphasize safety warn-
ings that must be followed when using this product:
This instruction manual is intended for your benefit. Please read and follow the safety, installation,
maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents
of this instruction manual are based upon the latest product information available at the time of publication.
The manufacturer reserves the right to make product changes at any time without notice.
DANGER Indicates an imminently hazardous
situation that, if not avoided, WILL result in
death or serious injury.
WARNING Indicates a potentially hazardous
situation that, if not avoided, COULD result in
death or serious injury.
CAUTION Indicates a potentially hazardous
situation that, if not avoided, MAY result in
minor or moderate injury.
NOTICE Indicates important information,
which if not followed, MAY cause damage to
equipment.
After opening the carton, unpack your new product and related parts & accessories. Please inspect it
carefully for any damage that may have occurred during transit. Please check it against the photograph
on carton. If any parts are missing, please call customer service at 1-800-426-1262 between 6 a.m. and 5
p.m. Pacific time.
WARNING: DO NOT operate this product if damaged during shipment, handling or misuse. Do not
operate the product until the parts have been replaced or the fault rectified. Failure to do so may result in
serious personal injury or property damage. All damaged parts must be repaired or replaced as needed
prior to operating this product. Check to see that all nuts, bolts and fittings are secure before putting this
product into service. If you have any questions, or require assistance with damaged or missing parts,
please contact our factory customer service department at: 1-800-426-1262. Please have the serial
number, model number, and date of purchase available for reference when calling.
WARNING: Some dust created by power sanding contains chemicals known to the State
of California to cause cancer, birth defects or other reproductive harm. An example of this
type of chemical is
-lead from lead based paints,
-Crystalline Silica from bricks and cement or other masonry,
-Arsenic and Chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure: work in a well ventilated area and work with approved safety equip-
ment, such as dusk masks that are specially designed to filter out microscopic particles.
Summary of Contents for M624
Page 7: ...7 REPLACEMENT PARTS LIST ...
