9
Caring For Your Tens Device
Your TENS device may be cleaned by wiping gently with a damp cloth moistened with
mild soap and water. Never immerse the device in water or other liquids. Wipe lead wires
with a damp cloth as above if they become soiled. To properly store the TENS device for
extended period of time, remove the battery from the unit. Put the unit and accessories in
the carrying case and store in a cool dry location.
Troubleshooting
If the TENS device does not function properly:
1. Make sure the battery is properly installed or replace battery. Be sure to observe proper
polarity markings when replacing the battery. If the yellow light on the front of the unit
does not stay lit when the unit is turned on, replace the battery and check again.
2. If the ON/OFF Indicator Light is flashing and you still feel no stimulation, check that
the lead wires are properly connected and the electrodes are in place. If the unit
appears to be functioning and no stimulation occurs, the lead wires or electrodes may
need
to be replaced.
3. If the battery appears to be charged and the unit is not functioning, turn both lntensity
Control Knobs to the OFF position(counter clockwise). Then gradually turn the lntensity
Control Knob to the on position.
If there is any other problem, please consult or return the device to your distributor.
Do not try to repair a defective device.
System Components
Your TENS device should include the following components or accessories:
• TENS unit
• Lead wires
• Electrodes
• Battery
• Soft Bag
