2.
Align the mounting holes of SSD/HDD and HDD bracket. With the SSD/HDD right side up, place the
SSD/HDD on the bracket. Make sure the connectors of SSD/HDD are toward front side
3.
Turn the SSD/HDD and bracket over and insert one screw in each mounting hole on the bottom of the
bracket. Using accessory item P/N: 0F0100500600100L
4.
Replace the bracket to its original place and insert one screw in each mounting hole (using the original
screws). Connect SATA-to-SATA interface cable and SATA power cable. Finally replace the top case to its
original place and insert one screw in each mounting hole (using the original screws)
