OXY5737A User’s Manual V1.1
www.perfectron.com
USB hardware delays and time-outs:
USB transfer time-out:
The time-out value for Control, Bulk, and Interrupt transfers. The options are 1
sec, 5 sec, 10 sec, 20 sec.
Device reset time-out:
USB mass storage device Start Unit command time-out. The options are 10 sec,
20 sec, 30 sec, 40 sec.
Device power-up delay:
Maximum time the device will take before it properly reports itself to the
Host Controller. ‘Auto’ uses default value: for a Hub port the delay is taken from Hub descriptor. The
options are Auto, manual.
4.4.10 IT8786 Super IO Configuration
System Super IO Chip Parameters.
Serial Port 1 Configuration
Set Parameters of Serial Port 0 (COMA).
Serial Port:
Enable or Disable Serial Port (COM).
Device Settings:
IO=3F8h, IRQ=4
Change Settings:
Select an optimal setting for Super IO device.
55
