OXY5320A 3.5” SBC User’s Manual V1.2
www.perfectron.com
Device power-up delay
Sets the maximum time the device will take before it properly reports itself to the
Host Controller. 'Auto' uses a default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from the Hub descriptor.
4.4.9 SMART Settings
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for
computer hard disk drives to detect and report on various indicators of reliability, in the
hope of anticipating failures. SMART. failure messages might indicate the need to replace
the storage device.
4.4.10 Super IO Configuration
Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an
optimal settings for the Super IO Device.
Serial Port 0-4 Configuration
Use this item to enable or disable the onboard serial port.
Parallel Port configuration
Use this item to enable or disable the onboard parallel port.
27
