OXY5316A 3.5” SBC User’s Manual V1.2
www.perfectron.com
Chapter 3: Getting Started
3.1 Installing System Memory
The OXY5316A supports DDR3 800/1066 SO-DIMM.
Disconnect all power supplies to the board before installing a memory module to prevent
damage to the board and memory module.
To install a memory module:
1.
Located the memory module slots on the motherboard.
2.
Push the socket retaining clips outward to unlock the slots.
3.
Align the memory module with the socket to make sure the notch aligns with the slot key on the
socket.
4.
Insert the module firmly into the desired slot until the retaining clips lock and secure the
memory module.
3.2 Installing the CFast card
The OXY5316A built-in CFast socket
To install a CFast card:
1.
To install a CFast card into OXY5316A, align the notches on the card with the
CFast socket.
2.
Then firmly insert the card into the socket until it is completely seated. The label side should be
facing away from the board.
19