GB
Device List
In the radio, you can select the Bluetooth device from the device list to connect again.
The device names would be shown if the name of the Bluetooth devices were configured
in the mobile devices. Please refer to the user manual of your mobile device for the
configurations.
The device lists can be checked as below:
1. In Bluetooth mode, press the
MENU button
.
2. Rotate the
TUNING/SEEK/SELECT knob
to “View details”; press the
TUNING/
SEEK/SELECT knob
to select setting.
3. Rotate the
TUNING/SEEK/SELECT knob
to “Paired Device list”; press the
TUNING/SEEK/SELECT knob
to select the setting.
4. Rotate the
TUNING/SEEK/SELECT knob
to view the name of the devices.
5. Press the
TUNING/SEEK/SELECT knob
to start Bluetooth reconnection. The
speaker will automatically connect to this mobile device.
Note:
There can be up to 8 device names to be stored in the speaker. If there are more
than 8 mobile devices have been connected and stored into the speakers, the earliest
paired device name will be erased.
Note:
If you have ever deleted the
“Perfectpro Rockpro”
from your connected mobile
device, the auto reconnection will be unsuccessful.
Restart Bluetooth pairing
The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the
MENU button
.
2. Rotate the
TUNING/SEEK/SELECT knob
to “Setup Bluetooth” options, and press
the
TUNING/SEEK/SELECT knob
to select the setting.
3. The radio will try to disconnect the current paired Bluetooth, then available to be
connected by the new Bluetooth device.
4. At the stage, the Bluetooth indicator will be flashing on the screen until the new
Bluetooth pairing is completed.
Note:
“Setup Bluetooth” is the option that force the Bluetooth of this radio to disconnect
from your mobile phone and enter the “discoverable mode”. This is the way to allow
the Bluetooth pairing to another device. If no new device is paired, the Bluetooth will
automatically try to connect to the last device when it is switched off and on again.
The Auto-Power management function will be activated in Bluetooth mode. If there is no
signal from Bluetooth for a period of over 15 minutes, the radio will automatically switch
to standby mode. Pressing the
ON/OFF button
will wake up the unit.
14
