PERFECTPRO Cubi, Operating Instruction

Page: 18 / 141

17
Presetting stations
You may store your preferred FM radio stations to the preset
station memories (1 to 6). The procedure for setting presets and
using them to tune stations is described below.
1. Press the STANDBY button to turn on the radio.
2. Press the SOURCE button and tune to the required station as
previously described.
3. Press and hold the required Preset button (1~6) until radio
beeps and the display shows corresponding “MX” on the upper
right corner.
4. Repeat this procedure for the remaining presets as you wish.
5. Stations stored in preset memories may be overwritten by
following above procedures if required.
Recalling a preset station
1. Press the STANDBY button to turn on the radio.
2. Press the SOURCE button to select FM band.
3. Momentarily press the required Preset button (1~6) to cause
your radio to tune to the station stored in preset memory.