IP500 User Manual
24
4.7.7
RPort Function: you can setup the RPort Enable/Disable in this page. To change this setting,
please following your ISP information. When you finished the setting, please click the Submit
button.
4.7.8
Other Settings: you can setup the Hold by RFC, Voice/SIP QoS and SIP expire time in this page.
To change these settings please following your ISP information. When you finished the setting,
please click the Submit button. The QoS setting is to set the voice packets’ priority. If you set the
value higher than 0, then the voice packets will get the higher priority to the Internet. But the QoS
function still need to cooperate with the others Internet devices.
4.8
NAT Trans.
4.8.1
In NAT Trans. you can setup STUN function. These functions can help your VoIP Phone working
properly behind NAT.
4.8.2
STUN Setting: you can setup the STUN Enable/Disable and STUN Server IP address in this
page. This function can help your VoIP Phone working properly behind NAT. To change these
settings please following your ISP information. When you finished the setting, please click the
Submit button.
4.9
Others.
4.9.1
In Others you can setup Auto config function. The function can configure your VoIP Phone
automatically.
Summary of Contents for IP 500
Page 7: ...IP500 User Manual 7 ...
