Overhead Rigging
3
Attention!
The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and /or damage to property. Overhead rigging required
extensive experience! Working load limits should be respected, Certified installation materials
should be used, the installed device should be inspected regularly for safety.
Make sure the area below the installation place is free from unwanted persons during rigging, de-
rigging and servicing.
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids.
The fixture must be fixed at least 50cm from surrounding walls
The device should be installed out of reach of people and outside areas where persons may walk
by or be seated.
The device should be well fixed; a free swinging mounting is dangerous and may not be
considered!
Do not cover any ventilation opening as this may result in overheating
Before the first time use, it must be inspected by professional staff to make sure safety, inspection
regularly every year.
◆
◆
◆
◆
◆
◆
Before rigging make sure that installation area can hold the 10 times weight of device. Using the
steel rope which can hold 12 times weight of device, through the eye-bolt for assisting hang
installment.
Please use the attached power, note that power voltage and
frequency are the same as the marked voltage and frequency of
device when connecting power. Every device’s power should be
connected separately, so that device can be controlled individually.
AC Power
Cable(EU)
Brown
Liht blue
Yellow/Green
Cable(US)
Black
White
Green
Pin
Live
Neutral
Earth
International
L
N
Safety-rope
Adjust Angle
Clamp
