3
-“Down” key during Mode and Date/Time setup.
LCD Display :
1
st
Row
: Temperature & °F/°C symbol
2
nd
Row
: Battery status icon / Humidity data/
External probe (EXT) / Record (REC)
/ MAX / MIN icons
3
rd
Row
: Date / Time icons and display
Operating Instruction – Getting Started:
1. Open PRIME CAPSULE back cover and put in 2 AAA size batteries.
2. The data logger will start up and LCD screen will turn ON for 60s,
showing current Temperature and Humidity readings.
3. It then will turn OFF and enter standby state.
4. Press and release MODE/SET button to show current readings, the
unit will enter standby after 20s.
5. To set up data logging, use; PC setting or Manual Setting (both
below).
Note :
1. Please set the correct date and time before logging, using the PC
SYNC Software/through the MANUAL “P5”-Clock Setting Mode (See
below)
2. After the capsule is setup for data logging, it enters standby mode
where the LCD will be turned off.
3. Press MODE/SET button to show current readings and recording
(REC icon), the unit will enter standby after 20s.
