Step 7
Align the holes on the left back side of body
assembly with the holes on the back of the left side
storage assembly.
Screw a M6x16mm bolt (B) with a spring washer
(D) and M6 washer (E) into the pre-drilled hole.
Tighten by hand until secure.
Go back and tighten the bolts (included from step 5
& 6) with the screwdriver provided.
.
Step 8
Align the holes on the bottom the
right side storage assembly with the
holes on the bottom of the right side
panel.
Screw a M6x16mm bolt (B) with a
spring washer (D) and M6 washer (E)
into each pre-drilled hole.
Tighten by hand until secure.
GSC3318
10
Owner’s Manual
Summary of Contents for GSC3318
Page 26: ......
