SLG2008A
Owner’s Manual
8
Step 3
a) Place the top beam (FF) in front of the cart assembly.
Align the holes on the left inside of the cart assembly with
holes on the cart top beam.
b) Insert one M6x15mm bolt (A), one spring washer (D) and one
M6 washer (E) into each hole.
Tighten by hand until secure.
c) Repeat the procedure for right inside of the cart assembly.
d) Go back to tighten all the bolts using the screwdriver provided.
Step 4
a) Slide the heat insulating plate (TT) into the back of the cart
assembly.
Align the hole on the cart with pre-drilled holes on the heat
insulating plate.
Screw one M6 bolt (A) and one M6 washer
(E) into each pre-drilled hole.
b) Tighten all the bolts using the screwdriver provided.
c) Align the hole on the cart with pre-drilled holes on the spare
tank stopper (UU). Lock it by screwing one M6 bolt (A), one
spring washer (D) and one M6 washer (E) into one M6 nut
( I ) by hand.
d) Tighten all the bolts using the screwdriver provided.
