
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back and check to make certain all the bolts are tight. Tighten again with the screwdriver provided if it is
necessary.
Estimated Assembly Time: It will take less than 40 minutes to assemble the grill.
Step 1
Note:
Before beginning assembly, make certain the
wheels of the cart assembly are locked.
Align the holes at the bottom of the right side panel (1)
with the holes on the right side of the bottom panel (3).
Insert a M6x45mm bolt (C), a spring washer (D) and a
M6 washers (E) into each pre-drilled hole.
Tighten by hand until secure.
Repeat the procedure for the left side panel (2).
Go back to tighten all the bolts with the
screwdriver provided.
Step 2
Loosen two bolts (pre-attached) each on left and
right panel and allow 1/4 bolt length to extend from
the panel.
Align the large holes of the back panel (4) with the
bolts extended from the right and left panel and
push down until the back panel locks into place.
Tighten four panel bolts by hand until secure.
Go back to tighten all the bolts with the
screwdriver provided.
SLG2006C
7
Owner’s Manual