7
Pair with Bluetooth-enabled Device Using
One Touch (NFC)
Using an NFC compatible bluetooth device, you
can establish a bluetooth connection by just
touching the unit with it.
- Make sure bluetooth and NFC function is
enabled on your device .
1 Turn on the NFC function on your device.
- Make sure your device in the wake-up mode.
NFC sensing area
2 Turn on the unit and switch to bluetooth
source.
3 Touch the NFC sensing area with your device,
the unit will pair and connect with your
device.
4 Touch this area again, the unit will disconnect
the bluetooth connection.
Tips:
Some NFC-enabled mobile devices cannot pair
directly with the unit via NFC, please try either
one of the solutions below:
- Please download the Apps “Tap-and-Pair” from
Google Play Store (https:// play. google. com)
and install.
- Pair with the unit manually first, then touch
again on the NFC sensing area.
Listen to Music from Bluetooth Device
• If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
• If the device also supports Audio Video
Remote Control Profile (AVRCP), you can use
the player's remote control to play music
stored on the device.
Note:
- The operational range between this player and
a Bluetooth device is approximately 8 meters.
- Before you connect a Bluetooth device to this
unit, familiarize yourself with the Bluetooth
capabilities of the device.
- Compatibility with all Bluetooth devices is not
guaranteed.
- Any obstacle bet ween this unit and a
Bluetooth device can reduce the operational
range.
- Keep this player away from any other
electronic device that may cause interference.
1. Turn on the Bluetooth function on your device.
2. Switch player's source to bluetooth, Display
panel shows "
BLU T
", then shows "
NO BT
" (if
no bluetooth device is connected).
3. Press and hold "
B F
/ " button on remote
control for a few seconds to activate bluetooth
pairing mode, display panel shows "
PAIR
".
4. Search for bluetooth device with your device.
5. Select “
PC-112563
” in the pairing list.
6. Enter “0000” for the password if necessary,
display panel shows "
BLU T
" again.
7. To disconnect connection, turn off the
bluetooth function on your device or switch
the player to another source.
Tips:
- If a connection exist, hold and press "
BF
/ "
button on remote control for a few seconds to
re-activate the pairing mode, the connection
will be interrupted.
- If no other bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
- The player will also be disconnected when
your device is moved beyond the operational
range.
- If you want to reconnect your device to this
player, place it within the operational range.
- If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
- If they are connected, display panel shows
"
BLU T
".
- If the connection is lost, display panel shows
"
NO BT
". Follow the instruction above to pair
your device to the player again.
