6
STEP 1:
PREPARING THE EXHAUST HOSE
ASSEMBLY
Fig. 9
Press the exhaust hose into the window slider adapter and
unit adapter; it will snap automatically to the adapters.
STEP 2:
INSTALL THE EXHAUST HOSE ASSEMBLY
TO THE UNIT
Fig. 10
Slide the Exhaust hose into the air outlet opening of the
unit along the arrow direction, from left to right.
STEP 3:
PREPARING THE ADJUSTABLE WINDOW
SLIDER
Fig. 11
a. Depending on the size of your window, adjust the size of
the window slider.
b. If the length of the window requires two window sliders,
use the bolt (included) to fasten the window sliders once
they are adjusted to the proper length.
NOTE:
To ensure proper function,
DO NOT
overextend or
bend the hose. Make sure that there are no obstacles
around the air outlet of the exhaust hose (20 inch
clearance) in order to ensure the exhaust system works
properly. (Fig. 12.)
Once the Exhaust Hose assembly and Adjustable Window
Slider are prepared, choose from one of the following two
installation methods:
• Hung Window Installation (page 7)
• Sliding Window Installation (page 8)
FIG. 9
FIG. 10
FIG. 11
FIG. 12
Unit Adapter
Hook
Adapter
Bolt (if needed)
Window Slider A
Window Slider B
Lower
Groove
Make sure the
adapter is inserted
into the lower groove
of the air outlet.
Notch
Window Slider
Adapter
Exhaust Hose
Exhaust Hose Assembly
RECOMMENDED INSTALLATION
19.7 inches
50 cm
NOTE:
All the illustrations in this manual are
for explanation purposes only. Your unit
may be slightly different. The actual shape
of the unit prevails.
The unit can be controlled by it’s control
panel or with the remote control. This
manual does not include remote control
operations. See the Remote Control User
Manual included with the unit for details.
