8
OPTION 3: PUMP DRAINING
Water can be automatically emptied into a floor drain or a suitable
drainage facility by attaching the pump drain out with a pump drain hose
(
φ
1/4", supplied).
• Remove the continuous drain hose from the unit and install the plastic cover
to the continuous drain hose outlet of the unit by rotating it clockwise. (See
Fig. 13.)
• Reset the pump drain hose into the pump drain hose outlet for depth of at
least 15mm (See Fig. 13), then lead the water hose to the floor drain or a
suitable drainage facility.
• Press the pump pad of the unit to activate the pump operation. When the
bucket is full, the pump starts to work. NOTE: The pump may cause loud
noise for the first 3 – 5 minutes after it begins operating.
• Make sure the hose is secure so there are no leaks.
• Direct the hose toward the drain, making sure that there are no kinks that will
stop the water from flowing.
• Place the end of the hose into the drain and make sure the end of the hose
is level or down to let the water flow smoothly. Never let it up.
• Select the desired humidity setting at fan speed on the unit for pump
draining to start.
NOTES:
The pump operation on light blinks at 1Hz when the pump is in operational
failure. Please turn off the unit and unplug the power cord. Check the
following items:
• Cleaning the filter of the pump: Remove the bucket from the unit, take down
the pump and clean the filter of the pump. (See Fig. 14.)
• Check that the pump drain hose does not link or block.
• Empty the water from the bucket.
• Reinstall the pump hose if it drops and reinstall the bucket properly. Turn on the unit. If the error repeats, call
Consumer Services at 844-472-2473.
NOTE:
Do not use this operation when the outdoor temperature is equal to or less than 32°F (0°C). Otherwise, water
will become ice that will cause the water hose to block up and unit to fail. Make sure to empty the bucket once a week
when using the pump draining feature. When the pump draining feature is not being used, remove the pump drain
hose from the outlet.
• Press the pump drain hose outlet in and take the pump drain hose out from it. (See Fig. 15.) Make sure not to let the
water in the pump hose drip onto the floor.
OPTION 3: PUMP DRAINING
FIG. 13
FIG. 14
FIG. 15
Reinstall the
Plastic Cover
Pump Drain Hose
1. Press the
pump drain
hose outlet in.
2. Take the pump
drain hose out.
Pump Filter
Pump Drain
Hose Outlet
Summary of Contents for 4PADP95
Page 15: ...12...
