background image

2

CAUTIONS

When removing air filter, 

DO NOT

 touch metal parts of 

the unit.

Doing so may cause an injury.

DO NOT

 clean with water.

Water may enter the unit and degrade the insulation 

causing an electric shock.

Ensure proper ventilation especially in rooms with a 

stove or other appliances.

Failure to do so may result in an oxygen shortage.

Unit and circuit breaker/fuse must be switched OFF 

when cleaning.

Cleaning unit when power is ON may cause fire and 

electric shock and may cause an injury.

DO NOT 

put a pet or house plant where it will be ex-

posed to direct air flow.

This could injure the pet or plant.

Use 

ONLY

 as intended.

This unit is 

NOT

 intended to preserve precision devic-

es, food, pets, plants, and art objects. It may cause 

deterioration of quality, etc.

Stop operation and close the window in severe 

storms or hurricanes.

Operation with windows open may cause moisture to 

enter the room.

Hold the plug by the head of the power plug when 

taking it out.

Failure to do so may cause electric shock  

and damage.

If unit will not be used for a long period of time,  

unplug or turn 

OFF

 main power switch.

Leaving power on may cause unit failure or fire.

Do not place obstacles around air-inlets or inside of 

air-outlet.

Obstacles may cause appliance failure or accident.

Periodically check installation bracket for damage.

Prolonged exposure to outdoor elements may cause 

damage to installation bracket, causing unit to fall.

Always insert filter(s) securely. Clean filter(s) 

AT LEAST

 

once every two weeks.

Operation without securely installed filters may  

cause failure. A dirty filter can cause the unit to not  

run efficiently.

Use only a soft cloth to clean the unit.

Cleaners or detergents may change the color or 

scratch the surface of the unit.

Use caution when unpacking and installing.

Sharp edges could cause injury.

NEVER

 drink water drained from air conditioner.

Water from unit contains contaminants and could 

cause illness.

DO NOT

 place heavy objects on the power cord and 

always ensure that the cord is not compressed.

There is danger of fire or electric shock.

If water enters the unit’s electrical components, turn 

the unit off at the power outlet and switch off the cir-

cuit breaker. Isolate supply by taking the power-plug 

out and contact a qualified serviced technician.

There is danger of electric shock.

Summary of Contents for 3PNC10000

















Reviews: