10
REPLACING BATTERIES
The following cases indicate exhausted
batteries. Replace old batteries with new ones:
• Receiving beep is not emitted when a signal is
transmitted.
• Indicator fades away.
The remote control is powered by two dry AAA
batteries (R03/LR03X2) housed in the back rear
part and protected by a cover.
1. Slide the cover off of the rear part of the
remote control as illustrated.
2. Remove the old batteries and insert the
new batteries, placing the (+) and (—) ends
correctly.
3. Re-install the cover.
NOTE:
When the batteries are removed, the
remote control erases all programming. After
inserting new batteries, the remote control must
be reprogrammed.
!
CAUTIONS
• Do not mix old and new batteries or
batteries of different types.
• Do not leave the batteries in the remote
control if they are not going to be used for 2
or 3 months.
• Do not dispose batteries as unsorted
municipal waste. Collection of such waste
separately for special treatment
is necessary.
Summary of Contents for 1PAMSHH series
Page 2: ......
Page 15: ...CR166 RG57A6EU1 16117000A03597...
