BUTTONS AND FUNCTIONS
(Continued)
5
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control.
The following is a brief introduction to the remote control itself. For instructions on how to operate your
air conditioner, refer to the How to Use Basic Functions section of this manual.
TEMP
Increases temperate in 1°F (1°C)
increments. Max. temperature is
86°F (30°C).
SET
Scrolls through operation
functions as follows:
Fresh( ),
Follow Me ( ),
AP mode( )
The selected symbol will flash
on the display area, press the OK
button to confirm.
Note: Fresh mode not available on this unit
TEMP
Decreases temperature
in 1°F(1°C) increments.
Min. temperature is 60°F(16°C).
FAN SPEED
Selects fan speeds in
the following order:
AUTO - LOW - MED - HIGH
TIMER ON
Sets timer to turn unit on
(see How to Use Basic
Functions for instructions).
LED
Turns indoor unit’s LED display and air
conditioner buzzer on and off, which creates
a comfortable and quiet environment.
SLEEP
Saves energy during
sleeping hours.
°C/°F
Switch the temperature
display between °C & °F.
TIMER OFF
Sets timer to turn unit off
(see How to Use Basic
Functions for instructions).
SWING
Starts and stops the
horizontal louver movement.
OK
Used to confirm the
selected functions
ENERGY SAVER (Eco mode)
Press this button to activate the
Energy Saver mode. Press it
again to stop the funtion.
MODE
Scrolls through operation modes
as follows: AUTO - COOL - DRY
- HEAT - FAN
NOTE: This model does not
support HEAT mode.
ON/OFF
Turns the unit on or off.
WARNING
Pressing the LED and °C/°F buttons at the same time will lock your remote and disable the buttons.
If your remote is unresponsive, press these buttons at the same time for 5 seconds, then try to use
the remote again.