![background image](http://html.mh-extra.com/html/perel/psb07001/psb07001_manual_1528724002.webp)
PSB07001
2
PEREL
•
Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
•
When using an extension cord, make sure the wires are at least 1mm². Do not use extension cords on a reel.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
•
Always make sure you are in a stable position while using the
PSB07001
.
•
Make sure you can never touch water, electricity or gas lines while drilling.
•
Do not use the
PSB07001
in the vicinity of flammable vapours and substances.
•
Vibrations can damage the arm-hand system. Keep exposure to vibrations as short as possible.
3. Specific Safety Instructions
•
Use a vacuum cleaner to collect the dust.
4. Description (fig. A)
1. ON/OFF switch
2. Unlock button
3. Dust exhaust
4. Carbon brush
holder
5. Belt centring knob
6. Clamping lever
7. Belt rollers
8. Dust bag rollers
9. Dust bag
5. Operating Instructions
IMPORTANT
: Sanding requires a low pressure from your side. Too much pressure will place unnecessary load on
the motor. Check the sanding paper regularly. Replace used sanding paper.