Perel CRC1001, User Manual

Page: 4 / 16

CRC1001 PEREL
- 4 -
Refer to the following table set up each unit:
Bank Device Codes Brand Code Setting Quick Search
TV TV / CTV / TXT 304
000-268
700-734
000-699
700-734
750-758
800-883
000-268
700-734
VCR VCR 111
269-370
750-758
000-699
700-734
750-758
800-883
269-370
750-758
SAT/CBL Satellite / Cable 237
371-523
800-883
000-699
700-734
750-758
800-883
371-523
800-883
AUX
CD / LD / DVD /
VCD / AMP /
HIFI
176 524-699
000-699
700-734
750-758
800-883
524-699
4. Switching to a Different Device
When you press the device key (TVTXT1, TVTXT2, VCR1, VCR2, SAT/CBL, CBL/SAT or HIFI/CD/LD) for the
second time in order to confirm the code, the
CRC1001
will leave the setting mode for the code of the first device.
Select the second device you wish to operate. In other words, press TVTXT1, TVTXT2, VCR1, VCR2, SAT/CAB,
CAB/SAT or HIFI/CD/LD. Use the procedure explained under “
Setting up the Unit
” or “
The “Quick Search”
Function
” to set the codes for the other devices: TVTXT1, TVTXT2, VCR1, VCR2, SAT/CAB, CAB/SAT,
HIFI/CD/LD.
This means that you should always use the following procedure: press SET, press a device key, press SET again
and press POWER repeatedly until the selected device reacts to the signal from the VRC801. Press the device key
again to confirm the code for the device.
5. Reading Out the Code
Hold SET and press
. The first digit is indicated by the number of times the LED flashes.
Hold SET and press . The second digit is indicated by the number of times the LED flashes.
Hold SET and press . The third digit is indicated by the number of times the LED flashes.
Factory Settings for the Device Codes:
Device Factory Setting Brand
TVTXT1 027 Philips RC5 (TV)
TVTXT2 075 Telefunken (TV)
VCR1 278 Philips RC5 (VCR)
VCR2 284 Grundig (VCR)
SAT/CBL 424 Philips RC5 (SAT)
CBL/SAT 521 GMI-909 (CBL)
HIH/CD/LD 552 Philips RC5 (CD)
6. Power Supply
Insert 2 x 1.5V AAA type batteries.