10x38mm
Secure Screw
X4
Surface Fixed
1. Assemble Akadinda frame
comprising 2x ‘X’
-shaped legs
and 1x horizontal beam. (See
Assembly Guide).Cover 8
holes on horizontal beam
using 4xBlack caps (1.1)
4. Place Akadinda in desired
location and mark 4 holes for
surface fixing.
Ground Surface
Installation Instructions
Height to centre of notes:
KS0 3-5 500mm Depth 400mm
KS1 5-7 650mm Depth 250mm
KS2 7-11 750mm Depth 150mm
Adult 900mm Surface Mounted
5. Fix to Surface using
recommended ground
anchors not supplied
6. Make sure all fixings are
covered and secure using
cover caps provided
(1.1)
(1.2)
(1.3)
Black Caps
X8
M10x130
Bolt X2
M8 Lock
Nut X4
M8x25 SS
Washer X8
Eye Straps
X2
M10 Wedge
NutX2
Pin Torx 25
Driver Bit X1
M10 x30 SS
Washer X2
5x70mm
Screw X4
Mount eye straps in the
centre of the beam 360mm
from each end to attach the
beaters.
Pair Large Red
Beaters X2
Instrument
Components:
48 Kg
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
1.5m
Akadinda
Page 1 of 2
1.5m
Weight of heaviest part
28kg
(Frame)
BS EN 1176
L Brackets
x4
2 Part Cover Cap
x4
2.Locate M8x80mm eye bolts
through pre drilled holes
using flat washers on both
sides of the timber to prevent
the fixing pulling into the
timber. Secure in place with
M8 nyloc nuts, cover 4 holes
in ends using 4xBlack caps.
(1.2)(1.3)
3. Attach L Brackets to legs of
frame with coach bolts
provided. Pilot holes required
to stop timber from splitting
M8x50 Coach Screw
x8
Surface Fix
Components:
Ground Anchors
not supplied
Metric Conversion:
150mm/ 6”
250mm/ 10”
360mm/ 14”
400mm/ 16”
500mm/ 20”
650mm/ 26”
750mm/ 30”
900mm/ 35”
1.5m/ 59”
Spares available from
percussionplay.com
or from your
local distributor
